000 588 13 23 00 Straightening bench

Type ws · emne 60.00 · version 0106 · 2019-11-13

Gælder for: Model 117, 118, 156, 166, 167, 176, 177, 190, 197, 204, 205, 207, 212, 213, 217, 218, 219, 231, 238, 242, 246, 247, 253, 257 Model 222 except code Z07 (B7 armoring on special protection version) except code Z19 (Pullman government sedan) except code Z31 (Pullman Guard government sedan) Model 453 Model 463 Model 470, 471 Model 907 except code IR6 (Wheelbase 4325 mm, overhang 1615 mm) except code IR7 (Wheelbase 4325 mm, overhang 2015 mm) Model 910

Ikke tilgængelig på “da”; vises på Engelsk.

WS60.00-P-0138K

13.11.2019

Model	117, 118, 156, 166, 167, 176, 177, 190, 197, 204, 205, 207, 212, 213, 217, 218, 219, 231, 238, 242, 246, 247, 253, 257
Model	222
	except code Z07 (B7 armoring on special protection version)
	except code Z19 (Pullman government sedan)
	except code Z31 (Pullman Guard government sedan)
Model	453
Model	463
Model	470, 471
Model	907
	except code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
	except code IR7 (Wheelbase 4325 mm, overhang 2015 mm)
Model	910

Verwendung in FG 60/61/62/63/64/Satz K

Purpose:
Straightening bench for measuring and repair of vehicle bodies.
Test equipment category CAT_A.
Reference information:
Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

000 588 13 23 00

Note:

Current data sheets can be obtained directly from the manufacturer.

Manufacturer:

CAR-O-LINER AB

Hulda Mellgrens Gata 1

421 32 Västra Frölunda

Sweden

http://www.car-o-liner.se

 Type/model: MB BenchRack 5500 Standard

Article no.: 40217