ws4700n0034b

001 589 00 07 00 Claw-type wrench

Type ws · emne 47.00 · version 0113 · 2019-09-17

Gælder for: Engine 457.9, 458.9, 470.9, 471.9, 473.9, 541.9, 542.9, 900.9, 902.9, 924.9, 925.9, 926.9, 933.9, 934.9, 935.9, 936.9, 941.9, 942.9 BlueTEC

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.00 Generelt — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 933 (modeller 9**) · Serie 934 (modeller 9**) · Serie 936 (modeller 9**) · Serie 942 (modeller 9**)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.1 Grundinformation — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 933 (modeller 9**) · Serie 934 (modeller 9**) · Serie 936 (modeller 9**) · Serie 942 (modeller 9**)

Gælder også for motorer/gearkasser: 457 9**, 458 9**, 473 9**, 541 9**, 542 9**, 924 9**, 925 9**, 926 9**, 935 9**, 941 9**

WS47.00-N-0034B

001 589 00 07 00 Claw-type wrench

02.09.2019

Engine

457.9, 458.9, 470.9, 471.9, 473.9, 541.9, 542.9, 900.9, 902.9, 924.9, 925.9, 926.9, 933.9, 934.9, 935.9, 936.9, 941.9, 942.9

BlueTEC

001 589 00 07 00 Claw-type wrench

Verwendung in FG 14/47/49/Satz B


Purpose:
The claw wrench is used to release and tighten the locking ring at the AdBlue® SCR fill level and temperature sensor of the AdBlue® tank.
Note:
The claw wrench is only required for AdBlue® tanks equipped with an AdBlue® SCR fill level-temperature sensor, with integrated AdBlue® heater.

001 589 00 07 00