Purpose: Car roller brake test stand for checking brake forces at wheels. Test equipment category CAT_B. Procurement information: This criteria catalog is intended as an aid for selecting one of the commercially available variants of a workshop equipment item. It merely describes the minimum requirements for fulfilling the Mercedes-Benz standard. No reference is therefore made to manufacturer-specific equipment or items.
000 588 05 21 00
Minimum requirements:
International technical standard equipment for car brake test stand:
Roller set with rideover load of at least 4 t
Roller set with usable test width of 800 to 2,200 mm
Test speed 4 km/h
Engine power approx. 2x4 kW
Galvanized roller set
Plastic-coated roller surface with tire-to-road friction coefficient for tire/roller when dry 0.7/wet 0.5
PC with printer for printing out test log
Remote control for controlling brake test stand
Startup blocking protection
Automatic roller brake for testing automatic vehicles
Pedal force meter
Switchover mode from manual to automatic mode
Automatic on/off circuit and automatic restart
Standardized data interface for data transfer (e.g. USB, LAN etc.)
Lockable main switch
Optional:
Retractable aid
Pit safety device for pit installation
Supplement for use with vans:
Rollers with rideover load of at least 5 t
Roller set with usable test width of 800 to 2,200 mm
Preinstallation for checking trip recorder and tachographs
Simultaneous display
Please note the following, depending on the country:
While using ASA Life Stream, the use of a second LAN interface is required
