Gælder for: Rear axle 740.8, 746.210/22, 748.2/59/7 Required as from use of wheel hubs with double seal. Rear axle 741.71, 746.217/301, 770.001, 771.0/1 Rear axle 746.213 With single or double seal on wheel hubs.
Required as from use of wheel hubs with double seal.
Rear axle
741.71, 746.217/301, 770.001, 771.0/1
Rear axle
746.213
With single or double seal on wheel hubs.
Verwendung in FG 35/Satz B
Purpose: Drift for stamping-in sealing rings with Ø 175 mm.
748 589 04 15 00
For rear axles 746.21/22 and 748.59 with double seal, supplementary set 748 589 00 63 00 is also required.
When using a drift with a manufacture date up to September 2003 on axle model designation 746.2 with only one sealing ring, the groove (arrow A) must always be inserted with the specified dimensions. Otherwise, the sealing lip of the sealing ring may be damaged.
