ws1800n3012c

906 589 00 43 00 Insertion and extraction tool

Type ws · emne 18.00 · version 0205 · 2011-01-17

Gælder for: ENGINE 900, 902, 904, 906, 924, 925, 926

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.00 Generelt — Serie 900 · Serie 902 · Serie 904 · Serie 906

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.1 Grundinformation — Serie 900 · Serie 902 · Serie 904 · Serie 906

Gælder også for motorer/gearkasser: 924 ***, 925 ***, 926 ***

WS18.00-N-3012C

906 589 00 43 00 Insertion and extraction tool

FG 18/Set C

13.1.11

ENGINE 900, 902, 904, 906, 924, 925, 926

906 589 00 43 00 Insertion and extraction tool

906 589 00 43 00

Use:

Insertion and extraction tool for oil spray nozzle for cooling pistons in combination with an impact extractor 355 589 01 63 00.

906 589 00 43 00 Insertion and extraction tool

W18.00-1020-06

The insertion and extraction tool must be reworked.

Only for deliveries which occurred before 09/03.

Rework the insertion and extraction tool

1 Rework cutout (A, B) at bracket (1)

.

2 Rework port area (arrows) on knocking-in tool (2) and extraction tool (3) based on a new oil spray nozzle (port width).

3 Apply a chamfer (C) over the whole port area (inner and outer edge) for receiving the oil spray nozzle on the knocking-in tool (2) and extraction tool (3).

A 20 mm

B 27 mm

C 1 mm 45°