wh3501tra0000x

3501 - Rear axle Oil change Transporter T1/T2, models 741.0/2/3/4/5; (HL 2/15) models 742.47/48

Type wh · emne 35.00 · version 9211 · 1992-03-11

Gælder for:

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.00 Generelt

Gælder også for motorer/gearkasser: 741 400, 741 401, 741 404, 741 405, 741 406, 741 436, 741 437, 741 438, 741 439, 741 520, 741 521, 741 526, 741 527, 741 528, 741 529, 741 530, 741 540, 741 550, 741 560, 741 570, 741 580, 742 47*, 742 48*

Rear axle - oil change











Transporter T1

Transporter T2

Lubricant


Hypoid gear oil SAE 90, 85 W/90

For specified oil qualities and approved types of oil, refer to MB Specifications for Service Products

Capacities Liter

741.0/.2

(HL 1/2, 1/3)

1.6

741.3

(HL 2/5, 2/9)

3.2

741.4

(HL 0/1)

1.5

(HL 0/2)

1.6

741.5

(HL 0/3, 0/6, 0/7)

1.8

(HL 1/8)

1.6

(HL 1/9)

2.2

742.4

(HL 2/15)

3.7

Tightening torque Nm

Oil filler and oil drain plugs

100

3501 - Rear axle Oil change Transporter T1/T2, models 741.0/2/3/4/5; (HL 2/15) models 742.47/48

Special tool

3501 - Rear axle Oil change Transporter T1/T2, models 741.0/2/3/4/5; (HL 2/15) models 742.47/48

Drain oil while hot.

Clean surroundings of oil filler (1) and oil drain plugs (2).

Remove screw plugs (1 and 2) and clean.

Allow oil to drain completely.

Install oil drain plug.
Tightening torque 100 Nm!

Fill in oil up to the lower edge of the filler hole.

Install oil filler plug.
Tightening torque 100 Nm!

Henviste dokumenter