Engine 616 617
Torque specifications Nm
Nuts (4) and bolts (6) of front engine stop | 30 |
Adjusting bolt (2) of front engine stop | 130 |
Nut (1) at rear of engine stop (ref. value) | 70 |
Bolts (14) on rear engine mount | 20 |
Adjusting bolt (11) on rear engine mount | 30 |
Special tools
Locally fabricated tools
Gauge for adjusting
front engine stop
Note: The vehicle weight must rest on the wheels.
Torque or retorque all bolts and nuts to the specified torque with torque wrench except nut (1) on rear engine mount.
On engine 617.91 loosening and retightening of bolts on front engine stop is not required.
Front engine stop
P00-0021-53
Turn steering wheel to full lock either right or left.
Tighten bolts (6) and nuts) at front engine stop. When tightening nuts (4) hold bolts (5) in position.
Tighten nut (1) and bolts (14) on rear engine mount.
Lift lock (1) on front engine stop and move aside. Completely loosen adjusting bolt (2). Make sure that engine stop is not stuck to frame crossmember due to wax or paint.
P00-0018-13
Rear engine mount with engine stop
Version: 4 & 5 cylinder models with automatic transmission
Completely loosen adjusting bolt (11) on rear engine mount.
Place fabricated gauge (01) on front engine stop.
Shake engine from side to side by hand.
Tighten adjusting bolt (11) on rear engine mount.
Tighten adjusting bolt (2) on front engine stop and secure with lock (1).
Remove fabricated gauge.
P00-0019-17