Container from empty Mercedes-Benz 1-liter oil can |
P18.00-2394-05
1 | Remove adhesive label from front and rear side of empty Mercedes-Benz 1-liter oil can. |
2 | Cut empty Mercedes-Benz 1-liter oil can at the 500 ml mark as shown. |
3 | Approximately 15 mm below the cut edge of the Mercedes-Benz 1-liter oil can, use a suitable tool (e.g. Phillips screwdriver) to create two holes in the corner areas as shown. |
The holes should be just large enough so that a cable tie with dimensions measuring 4.7 x 390 mm can be pulled through. |
4 | Pull cable tie measuring 4.7 x 390 mm through the two holes of the lower section of the Mercedes-Benz 1-liter oil can as shown and close. |
You may need to pull the cable tie tighter together for the first application of the container from the empty Mercedes-Benz 1-liter oil can. |