wf5850n000201a

Thread adapter for beating out pressure regulating valve

Type wf · emne 58.50 · version 0101 · 2017-02-02

Gælder for: Model NMB613.355 with transmission 714.668 with code B10 (Voith retarder R115 (integrated)) Model NMB613.364 with transmission 714.120 with code B10 (Voith retarder R115 (integrated)) Model NMB613.365 with transmission 714.690/692 with code B10 (Voith retarder R115 (integrated)) Model NMB613.355/455/485 with transmission 714.690/691 with code B10 (Voith retarder R115 (integrated)) Model NMB613.358/388 with transmission 714.140 with code B10 (Voith retarder R115 (integrated)) Model 000.001 with transmissi

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 58 Værktøj › 58.50 Værktøj - egen fremstilling — Serie 000 (modeller 001) · Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.13 ledning/slange/ventil — Serie 000 (modeller 001) · Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

Gælder også for motorer/gearkasser: 714 120, 714 140, 714 143, 714 668, 714 690, 714 691, 714 692

WF58.50-N-0002-01A

Thread adapter for beating out pressure regulating valve

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger !

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

Model

NMB613.355 with transmission 714.668

with code B10 (Voith retarder R115 (integrated))

Model

NMB613.364 with transmission 714.120

with code B10 (Voith retarder R115 (integrated))

Model

NMB613.365 with transmission 714.690/692

with code B10 (Voith retarder R115 (integrated))

Model

NMB613.355/455/485 with transmission 714.690/691

with code B10 (Voith retarder R115 (integrated))

Model

NMB613.358/388 with transmission 714.140

with code B10 (Voith retarder R115 (integrated))

Model

000.001 with transmission 714.140/143

With hydrodynamic retarder R115 (integrated)

Thread adapter for beating out pressure regulating valve

1

Select the collar nut (1) and threaded unit (2) according to the specified dimensions.


Use a threaded union (2) of sufficient length to ensure that enough screw-in depth is provided.



2

Weld the collar nut (1) centrally to the threaded union (2).


1

Collar nut M8

2

Threaded union M20x1,5

G58.50-3140-01

Henviste dokumenter