wf5850b353103a

Press on sleeve for tapered roller bearing cone on drive pinion

Type wf · emne 58.50 · version 0300 · 2016-02-12

Gælder for:

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 58 Værktøj › 58.50 Værktøj - egen fremstilling

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring

Gælder også for motorer/gearkasser: 741 91*, 741 93*, 742 8**, 743 0**, 743 1**, 743 2**, 743 3**, 745 5**, 745 9**, 746 86*, 746 87*, 746 880, 746 888, 746 99*

WF58.50-B-3531-03A

Press on sleeve for tapered roller bearing cone on drive pinion

Press on sleeve for tapered roller bearing cone on drive pinion

W26.50-1041-01

Fabricate a polymer sleeve (plastic, nylon etc) as per the drawing.

Utilized to assist in the installation of the pinion at the inside race of the roller bearing.

Measurements:

A 52 mm Ø (+0.05) for axles 745.51/53/88/98/95, 746.87/97/99

A 53.45 mm Ø (+0.05) for axles 741.9, 745.51/53/88/98/95, 746.87/97/99

A 49.4 mm Ø (+0.05) for axles 743.0/1/2/3, 745.54/55, 746.89/98

B 22 mm

Chamfer the corners 4 mm x 30°.