P72.10-2740-06
1 Side airbag
2 Mounting holes
3 Location hole
4 Locating tab
Operation no. of the operation texts or standard texts and flat rates
Range | Op. no. | Operation text | Flat rate | Acc. no. | Code |
P | 721680 | Additional work to 1st door Location:.... replace transfer with components: Drill hole for side airbag | 003 WU/0.3 h | --- | --- |
1 | Place side airbag (1) into position on door | Use mounting holes (2) to align properly. | |
2 | Mark center of locating tab (4) | ||
3 | Remove side airbag | ||
4 | Drill =10.5 mm hole (3) in door sheet metal at center location | Ensure window glass will not be damaged by drilling. | |
5 | Smooth rough edges of hole | ||
6 | Clean, prime, and paint hole | ||
7 | Remove metal chips from bottom of door |
Parts ordering notes
Part no. | Designation | Quantity |
000 986 06 50 | Priming stick | 1 |