sm7210d0001a

Removing wind noise at driver and/or passenger door

Type sm · emne 72.10 · version 0100 · 2003-06-18

Gælder for: MODEL 901, 902, 903, 904

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 72 Døre › 72.10 Fordør — Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.40 Fordør — Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 901 · Serie 902 · Serie 903 · Serie 904

SM72.10-D-0001A

Removing wind noise at driver and/or passenger door

9.2.00

MODEL 901, 902, 903, 904

Removing wind noise at driver and/or passenger door

D72.10-1103-02

1 Window rail

Removing

1

Remove front door window

AR72.10-D-1910A

2

Remove window guide (1)

Installation: In order to prevent the sealing cord from crumpling, push both sides of the window rail down a little and screw to the top of the window cutout first

3

Bond window cutout in region of window rail up to approx. 3 cm below the lower edge of the window cutout (arrow) using sealing cord

4

Install in the reverse order

Parts ordering notes

Part no.

Designation

Quantity

001 987 54 46

Sealing cord, round, 5 mm

1

Henviste dokumenter