sm6420p101201a

Remove corroded rear floor assembly between the longitudinal member and the rear fender

Type sm · emne 64.20 · version 0100 · 2007-11-15

Gælder for: MODEL 210

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 64 Bagvæg og hæk › 64.20 Hæk — Serie 210

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.31 Bagvæg/hæk › 35.31.30 Bagvæg/hæk — Serie 210

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 210

SM64.20-P-1012-01A

Remove corroded rear floor assembly between the longitudinal member and the rear fender

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5119-06

Shown on model 210.2

1 Expose spot welds on rear floor assembly (1) and drill to diameter of 6.5 mm (area A).

2 Expose spot welds on rear floor assembly (1) and cut out (areas B and C).

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5120-11

Shown on model 210.2

3 Expose spot welds on rear floor assembly (1) and cut out (areas D and E).

4 Remove corroded rear floor assembly (1).

5 Remove any corrosion in the repair area using a shank brush.