sm5461d000502ts

Subsequently connect and install digital tachograph (DTCO), 2nd generation

Type sm · emne 54.61 · version 0100 · 2019-05-15

Gælder for: Model 907, 910 with code JD2 (Tachograph digital EC with rpm + aux-recorder) Model 907, 910 with code JV6 (Tachograph pre-installation kit)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.61 Speedometer, fartskriver, taxameter — Serie 907 · Serie 910

EinPAS 31 Kommunikation/information/underholdning › 31.35 Fartskriver/betalingssystem › 31.35.3 eftermontering/ombygning — Serie 907 · Serie 910

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 907 · Serie 910

SM54.61-D-0005-02TS

Subsequently connect and install digital tachograph (DTCO), 2nd generation

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Model

907, 910

with code JD2 (Tachograph digital EC with rpm + aux-recorder)

Model

907, 910

with code JV6 (Tachograph pre-installation kit)

Subsequently connect and install digital tachograph (DTCO), 2nd generation

D54.61-A010-08

Shown on model 907 with code FF8 (1-DIN slot at front under roof lining)

1

Route electric lines (2) and antenna line (3) outward as shown.

This makes it easier to connect the electric lines (2) and antenna line (3).

2

Connect electric lines (2) and antenna line (3) to 2nd generation digital tachograph (DTCO) (1).

3

Install 2nd generation DTCO (1) into device installation frame (4).

Ensure that no electric lines or component parts are damaged when inserting 2nd generation DTCO (1).
Otherwise, this can lead to 2nd generation DTCO (1) malfunctions, among other things.

Insert 2nd generation DTCO (1) until it engages audibly.

Henviste dokumenter