sm4220l000605b

Preparing waist rail wiring harness

Type sm · emne 42.20 · version 0101 · 2003-06-17

Gælder for: MODEL 668.###, 670.### ## up to 081120 up to 30.11.98 except CODE (B16) Dual-circuit hydraulic/dual-circuit compressed-air brake except CODE (B19) Boosted dual-circuit hydraulic/dual-circuit compressed-air brake

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.20 Parkeringsbremse — Serie 668 · Serie 670

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.16 Parkeringsbremse › 21.16.12 Sensor/kontakt/ledningssæt — Serie 668 · Serie 670

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 668 · Serie 670

SM42.20-L-0006-05B

Preparing waist rail wiring harness

Parts ordering notes

Part no.

Designation

Quantity

A 670 553 01 16

Parts kit 2 - Adaptation for B65 12 V and 24 V, left-hand steering

1

Parts identified with an X below are included in this parts kit

A 669 540 87 36

X Waist rail wiring harness (left-hand steering) or

1

A 669 540 88 36

Waist rail wiring harness (right-hand steering)

1

A 004 545 04 05

X Relay (12 V) or

1

A 003 545 96 05

X Relay (24 V)

1

A 006 545 44 26

X Sockets

2

N 072 581 000 304

X 10 A fuse

1

Preparing waist rail wiring harness

N42.20-2030-01

1 Pull out 3 relays on the left of the electrical center

2 Remove glove compartment lid and glove compartment

3 Fold electrical center forwards

4 Pull bracket for auxiliary relay forwards

Preparing waist rail wiring harness

N42.20-2023-01

1 Unplug contact spring of black/yellow cable from white connector XF.B5, chamber 7

2 Separate 1 x brown cable, 1 x blue cable and 1 x black/red cable from wiring harness

3 Separate connector X35 with 1.5 mm2 black cable to fuse F49 and the 4 mm2 black cable to fuse F39 from the remaining wiring harness

X35, white 1-pin connector

F49, compressed-air drier heater

F39, compressor