sm3550w0008a

Tighten bolts of wheel hub on trailing axle

Type sm · emne 35.50 · version 0100 · 2010-07-28

Gælder for: MODEL 375, 940 with REAR AXLE 749.733 Dual-tired trailing axle MODEL 930 with REAR AXLE 749.011 Dual-tired trailing axle MODEL 934 with REAR AXLE 749.111 Dual-tired trailing axle MODEL 958 with REAR AXLE 749.919 Dual-tired trailing axle

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.50 Ekstra aksler (forløbs-/efterløbs-/midter-/anhængeraksel) — Serie 375 · Serie 930 · Serie 934 · Serie 940 · Serie 958

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.42 hjulholder/akselspindel/hjulnav/hjulleje — Serie 375 · Serie 930 · Serie 934 · Serie 940 · Serie 958

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 375 · Serie 930 · Serie 934 · Serie 940 · Serie 958

Gælder også for motorer/gearkasser: 749 011, 749 111, 749 733, 749 919

SM35.50-W-0008A

Tighten bolts of wheel hub on trailing axle

27.7.10

MODEL 375, 940 with REAR AXLE 749.733
Dual-tired trailing axle

MODEL 930 with REAR AXLE 749.011
Dual-tired trailing axle

MODEL 934 with REAR AXLE 749.111
Dual-tired trailing axle

MODEL 958 with REAR AXLE 749.919
Dual-tired trailing axle

Tighten bolts of wheel hub on trailing axle

W35.50-1091-11

Shown on model 934.2 with rear axle 749.111

1 Screw

2 Wheel hub

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

O

027366

OPERATION: TIGHTEN BOLTS OF WHEEL HUB ON TRAILING AXLE

0.3 h

39 900 56

RADNABENLA

1

Tighten all the bolts (1) of the wheel hub (2) on the right and left trailing axle

Turn each bolt (1) to a rotation angle
of 45°.

For each wheel hub (2) 10 bolts (1) must be retightened.