sm3225w0015a

Replace shock absorber bracket of leading axle on frame

Type sm · emne 32.25 · version 0101 · 2019-07-24

Gælder for: Model 964

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.25 Støddæmpere, dæmperben, fjederben — Serie 964

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 964

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 964

SM32.25-W-0015A

Replace shock absorber bracket of leading axle on frame

22.07.2019

Model

964

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

N

028933

Replace shock absorber bracket of leading axle on frame

3,1 h

00 901 66

SLT-PAKET

Replace shock absorber bracket of leading axle on frame

Shown on left

1

Bracket

W32.25-1022-11

Replace shock absorber bracket of leading axle on frame

Shown on left

2

Bolts

W32.25-1024-11

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Notes on paintwork repairs

AH98.00-P-9408-02A

Remove

1

Remove rear step plate from cab

This allows access from above to the top screws/bolts (2) on the bracket (1) on the inside of the frame.

2

Remove upper section of fender of leading axle

The following operation steps must be performed on both sides of the vehicles.

3

Detach shock absorber of leading axle from bracket (1)

4

Expose frame wiring harness in area of screws/bolts (2)

When doing so, remove as many cable ties as necessary to allow the frame wiring harness to be pushed to one side and the screws/bolts (2) to be counterheld when loosening and tightening.

5

Detach bracket (1) from frame

The screws/bolts (2) remain on the frame and are not replaced.
With regard to return shipment or scrapping of removed parts, please observe the information in your warranty systems.

Install

6

Attach new bracket (1) to frame using new nuts

Bracket, shock absorber to frame

*BA32.25-N-1005-01G

7

Attach new cable ties to frame wiring harness

8

Attach shock absorber to new bracket (1) using new bolt and new nut

Shock absorber to bracket

*BA32.25-N-1003-01G

9

Paint replaced parts in frame color

10

Install upper section of fender of leading axle

11

Install step plate

Front axle shock absorber

Number

Designation

Model 963, 964

BA32.25-N-1003-01G

Shock absorber to bracket

Nm

330

Front axle shock absorber

Number

Designation

Model 963, 964

BA32.25-N-1005-01G

Bracket, shock absorber to frame

Nm

330

Parts ordering note

Part no.

Designation

Quantity

A 663 326 00 40

Left shock absorber bracket

1

A 663 326 01 40

Right shock absorber bracket

1

Henviste dokumenter