sm0715g0013ca

Change software release in engine control (MR) control unit

Type sm · emne 07.15 · version 0100 · 2020-09-07

Gælder for: Engine 924.9 in model 437.4 Code: 2007U07W11

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 437 (modeller 4**)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.11 Styreenhed/relæ — Serie 437 (modeller 4**)

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.40 Servicearbejde — Serie 437 (modeller 4**)

Gælder også for motorer/gearkasser: 924 9**

SM07.15-G-0013CA

Change software release in engine control (MR) control unit

21.08.2020

Engine

924.9 in model 437.4

Code: 2007U07W11

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

U

021925

Update software release in engine control (MR) control unit

7 AW/0,6 h

07 971 94

2007U07W11

Change software release

1

Connect diagnostic system, start XENTRY and switch on ignition.

To update the software release, the latest diagnosis versions and all add-on must be installed.

2

Perform initial quick test.

The initial quick test is stored until the end of the diagnosis session.

3

Select "Special functions".

4

Select "MR download".

5

Select "Download MR_14".

The download is menu-assisted.

6

Perform final quick test.

There must be no fault codes in the control units being updated.

If fault codes are still present in control units being updated,

then process the fault codes.

After obtaining special order.

7

End XENTRY and remove the diagnostic system.