Revisions
On model 220 there are a few changes in disabling and enabling the key rails.
Disabling keys/key rails | |||
1 | Activate EIS | ||
2.1 | Disable key with green workshop key. | Key rail is disabled in EIS only | |
2.2 | Disable key with STAR DIAGNOSIS. | Case a) Key in position "Ignition ON": key rail is disabled in all DAS 3 components (EIS and ESM). | |
Case b) Key not in position "Ignition ON": key rail is disabled in EIS only. | |||
Reenabling keys/key rails. | |||
1 | Program green workshop key. | ||
2 | Connect STAR DIAGNOSIS to vehicle. | ||
3 | Actuate vehicle with "Ignition ON" via STAR DIAGNOSIS. | ||
Only after vehicle is actuated with "Ignition ON" | |||
4 | Insert green workshop key into EIS | Data is transferred from the workshop key to the vehicle | |
Only when red LED is "OFF" | |||
5 | Remove workshop key | ||
6 | Insert reenabled key into EIS and turn to position "Ignition ON" | Wait until ESM has released the shift lever (press brake pedal). | |
Reenabling with STAR DIAGNOSIS possible only as of version 12/98 | |||
If the key is disabled in the EIS only, STAR DIAGNOSIS is not required for reenabling. | |||
Disabling of the key rail in the ESM can be checked with STAR DIAGNOSIS. | |||
The ignition can be switched "ON" with STAR DIAGNOSIS with menu guidance (model/body/control modules/EIS/control module adaptations/switch on ignition). |