We would like to notify you here of the following:
When retrofitting the tie-down rails at the platform floor, the repair materials listed below must be ordered in addition to the relevant parts kit.
It is important that you observe the instructions on the product data and safety data sheet.
The subsequent, commercially available tools are to be ordered once when retrofitting the tie-down rails at the platform floor:
Cartridge preheating furnace
SPECIFICATIONS:
Container size 310 ml
Adjustable heating temperature: 0 to 100 °C (target temperature 60 °C)
Electric or pneumatic squeeze gun
SPECIFICATIONS:
Operating speed 0-28 mm/sec (adjustable)
Maximum press-out pressure 500 kg
Cartridge support, 310 ml
The small cartridge tip (1), cutting wire (2) and rubber window spacers (3) enclosed in the repair materials are not required.
S60.30-0270-80