si6000p0018b

Service Information: Notes on threads in body

Type si · emne 60.00 · version 0100 · 2018-08-06

Gælder for: Model all (CAR)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 60 Karrosseri generelt › 60.00 Generelt — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.20 Førerhus/karrosseri › 35.20.1 Grundinformation — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

Gælder også for motorer/gearkasser: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI60.00-P-0018B

Service Information: Notes on threads in body

02.08.2018

Model

all (CAR)

Please note that the following points must be noted with regard to the thread in the body.

Thread in component parts made of aluminum alloys

Always screw bolts in and out by hand.

Tighten bolt with corresponding tightening torque as per basic data.

Defective thread

For repair requests, create PTSS case with explanatory pictures of the damage.

A defective thread must be checked for reparability before repairing it.

Thread repair

Not every thread can be repaired.

If it is not possible to repair the thread, the next largest component part must be replaced.

A repaired thread must be documented in the VeDoc system.