si4260g0017c
Service Information: Replacement of pressure limiting valve of compressed-air
system at annual maintenance service
Type si · emne 42.60 · version 0101 · 2020-04-02
Gælder for: Model 437.421/426/431/436 ## as of 241291 up to 262508
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.60 Pneumatik — Serie 437 (modeller 421, 426, 431, 436)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.35 trykluftsystem › 21.35.13 ledning/slange/ventil — Serie 437 (modeller 421, 426, 431, 436)
EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 437 (modeller 421, 426, 431, 436)
SI42.60-G-0017C
| Service Information: Replacement of pressure limiting valve of compressed-air system at annual maintenance service
| 02.04.2020
|
Model
| 437.421/426/431/436 ## as of 241291 up to 262508
|
1
| Pressure limiting valve
|
2
| Thrust ring
|
3
| O-ring
|
Additional maintenance scope "Replacing pressure limiting valve (1)"
Please remember that replacing the pressure limiting valve (1) was included in the maintenance scope.
The pressure limiting valve (1) must be replaced annually with immediate effect.
This only affects models 437.421/426/431/436 as of vehicle identification end number 241291, in which the pressure limiting valve (1) is installed.
The maintenance schedule has been extended by this scope. Please notify your workshop staff about the change in the maintenance scope.
|
| Remove/install pressure limiting valve of compressed-air system
|
| AR42.60-G-0023C
|
Henviste dokumenter
