si4210u0028a

Service Information: Cleaning axle hubs when installing brake discs

Type si · emne 42.10 · version 0100 · 2016-11-09

Gælder for: Model all

Ikke tilgængelig på “da”; vises på Amerikansk-engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.42 akselspindel/hjulnav/hjulleje — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.41 hjulholder/akselspindel/hjulnav/hjulleje — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.42 hjulholder/akselspindel/hjulnav/hjulleje — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)

Gælder også for motorer/gearkasser: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI42.10-U-0028A

Service Information: Cleaning axle hubs when installing brake discs

09.11.2016

Model

all

It is imperative that when installing brake discs (front or rear) the excessive corrosion / scaling (Figure 1), which may have developed on the axle hub, be removed. Use the “ATE Teves Hub Cleaning Kit” released via automatic delivery to remove the corrosion / scaling over the entire area where the brake disc mounts to the hub flange.

Failure to remove the corrosion / scaling may cause an excessive build-up which can create adverse forces that may result in brake vibrations / judder.

Note: Please reference Special Tools & Equipment Newschannel update dated November 12, 2014 for further information regarding the “ATE Teves Hub Cleaning Kit”.

Service Information: Cleaning axle hubs when installing brake discs

Figure 1

P42.10-3141-76