si4200g0005a

Service information: Adapter for VOSS compressed air connectors

Type si · emne 42.00 · version 0100 · 2009-07-22

Gælder for: MODEL 405.05 /1 /20 /22, 437.4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.00 Generelt — Serie 405 (modeller 05*, 1**, 20*, 22*) · Serie 437 (modeller 4**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.35 trykluftsystem › 21.35.13 ledning/slange/ventil — Serie 405 (modeller 05*, 1**, 20*, 22*) · Serie 437 (modeller 4**)

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 405 (modeller 05*, 1**, 20*, 22*) · Serie 437 (modeller 4**)

SI42.00-G-0005A

Service information: Adapter for VOSS compressed air connectors

16.7.09

MODEL 405.05 /1 /20 /22, 437.4

As a consequence of the conversion from the previous VOSS 230 compressed air connectors to the new VOSS 232 compressed air connectors, the current stepped bores for VOSS 230 on new brake components have been converted to through-bores for VOSS 232.

This is why, when installing new brake components, the pneumatic line terminals have to be converted to the new VOSS 232 compressed air connectors.

Because this is not always possible, the adapters listed below can be used with immediate effect.

When using the adapters, care must be taken to ensure that the pneumatic lines are not kinked, that they do not suffer from chafes and that there is sufficient unobstructed movement available in the installation space to prevent any malfunctions or damage.

Remove/install compressed-air line connector

With VOSS 232 compressed air connector

AR42.10-G-0900BC

Notes on compressed air connection systems

AH00.18-N-0001-01A

Parts ordering notes

Part no.

Designation

Quantity

A 001 997 19 70

Parts kit for NG 8 reducing fitting (for M16 thread)

As required

A 001 997 18 70

Parts kit for NG 12 reducing fitting (for M22 thread)

As required

Henviste dokumenter