Service Information bulletin: supplementary set for kink angle and bending angle measurement

P58.20-2236-12

Electronic multifunction level measuring device

1 Supplementary set (order no: 20033-51)

 On model 240 the propeller shaft diameter has been changed from 60 mm to 80 mm. Futhermore a new rear axle differential is currently installed. In order to be able to carry out a measurement of kink angle and bending angle, a
supplementary set (1) (order number:20033-51) is required.

This only applies to the initial delivery of the Maybach case.
(up to approx. 12/2007).

When re-ordering the electronic level multifunction unit (Maybach case)

Order no.: 20033-10 (230 Volt)

Order no.: 20033-11 (110 Volt)

the supplementary set (1) is already included.

Manufacturer and supplier:

Romess Rogg

Apparate + Electronic GmbH & Co. KG

Dickenhardtstraße 67

78054 VS- Schwenningen

Germany

E-Mail: [email protected]

See also GOTIS