si1800s0004a

Service Information bulletin: Engine oil extraction sensor

Type si · emne 18.00 · version 0200 · 2016-02-29

Gælder for: Engine 651 in model 447.### ## up to 002365

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.00 Generelt — Serie 447 · Serie 651

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.5 motorsmøring komplet — Serie 447 · Serie 651

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 447 · Serie 651

SI18.00-S-0004A

Service Information bulletin: Engine oil extraction sensor

25.02.2016

Engine

651 in model 447.### ## up to 002365

Modification notes

22.02.2016

GOTIS links from document deleted and document reference to WS18.00-P-0027B added

We would like to inform you that, on model 447.### ## up to 002365 with engine 651, the end stop for the oil extraction probe is not present in the oil pan. The oil extraction probe must therefore only be inserted 750 mm for oil extraction.

For further technical information on approved oil extraction probes, see workshop equipment in EPC via "Workshop Equipment" mode and in WIS document WS18.00-P-0027B.

Insert the engine oil extraction probe only 750  mm into the guide tube of the oil dipstick.
It will otherwise not be possible to extract all of the engine oil. Any quantity of oil remaining in the engine can result in overfilling after pouring in the specified oil change quantity. This can then result in damage to the engine and catalytic converter.

For instructions on how to change the engine oil and filter, see AP18.00­S­0101E.

Engine oil and filter change

AP18.00-S-0101E

000 588 05 82 00 Oil extraction sensor

WS18.00-P-0027B

Henviste dokumenter