SI09.10-G-0005C | Service Information: Optimized attachment of air filter housing | 31.10.06 |
ENGINE 904.952 in MODEL 437.420 /425 ## up to 208366 with CODE (M03) Increased engine output
ENGINE 904.953 in MODEL 437.420 /425 ## up to 208366
ENGINE 924.916 in MODEL 437.420 /425 ## up to 208366 with CODE (M04) Increased engine output
ENGINE 924.916 in MODEL 437.430 /435 ## up to 208366
In the event of unfavorable tolerances the air filter cover (1) of the air filter housing (2) can contact the mounting bracket of the plug-in flap during removal.
In order to simplify the removal of the air filter, it is possible to carry out the modification described in the following. The series production change took place as of end no. 208367.
G09.10-3125-01
1 Air filter cover
2 Air filter housing
3 Prefilter
G09.10-3135-01
G09.10-3136-01
G09.10-3137-01
G09.10-3138-01
4 Mounting console
6 Air filter housing bracket
7 Bolt (M825)
2 Air filter housing
5 Spacer plate
| Remove/install | ||
1 | Open engine hood | ||
2 | Remove air filter cover (1) from air filter housing (2) | ||
3 | Remove prefilter (3) | | |
4 | Remove air filter housing (2). | ||
5 | Install new mounting console (4) | ||
6 | Install spacer plate (5) between mounting console of air intake and air filter housing (2) | ||
7 | Install air filter housing (2) | Mount new spacer ring between bracket on front end and bracket of air filter housing (6) and attach with new bolt (7) (M825). | |
8 | Install air filter cover (1) on air filter housing (2) | ||
9 | Install prefilter (3) | | |
10 | Close engine hood |
Torx bit set
000 589 01 10 00
Parts ordering notes
Part no. | Designation | Quantity |
A 425 832 02 31 | Mounting console | 1 |
A 425 833 00 11 | Spacer plate | 1 |
n007349 010007 | Spacer ring, DIN 7349-10.5-ST | 1 |
n910105 008005 | Hexagon bolt, M825-10.9 | 1 |