The removed high-pressure lines (3) and the removed bracket (4) may not be used again.
If, in a repair case, the bracket (4) or one of the two high-pressure lines (3) are disassembled, then the bracket (4), both high-pressure lines (3), both clamps (2) and both vibration dampers (1) must always be replaced.
The parts to be replaced are collated in the high-pressure line parts kit.
1 | Vibration damper |
2 | Clip |
3 | High pressure pipe |
4 | Bracket |
W07.16-1141-12
Attach/detach test adapter for return quantity of pressure converter | Engine 471.9## ## up to 032690 in model 800.310 | ||
Attach/detach test adapter for return quantity of nozzle needle valves | Engine 471.9## ## up to 032690 in model 800.310 | ||
Attach/detach test adapter for measuring return quantity of pressure limiting valve | Engine 471.9## ## up to 032690 in model 800.310 | ||
Remove/install high-pressure line to rail | Engine 471.9## ## up to 032690 in model 800.310 |