27-1281 Adjustment of gearshift lever linkage.
1 Gearshift lever | 1 mm play between gearshift lever and "N" stop on shift gate. |
2 Counternut | |
3 Shifting linkage | |
4 Range selection lever |
Adjustment
-------------------------------
Note
The vehicle must be positioned on the wheels for the adjustment work listed below.
1 Disconnect shifting rod (3) on range selection lever (4) and set range selection lever to position "N".
2 Set gearshift lever (1) to position "N".
3 Loosen counternut (2) and adjust length of shifting rod (3).
4 A clearance of approx. 1 mm must be present between the gearshift lever (1) and the "N" stop on the shift gate.
5 Tighten counternuts after adjusting.