Function diagram for work hydraulics on circuit I and circuit II

Type ph · emne 55.30 · version 0100 · 2009-05-06

Gælder for: MODEL 405.10 /12 /20 /22 as of 1.7.09 with CODE (HP2) Single-circuit hydraulic system, 2-cell with CODE (HP4) Dual-circuit hydraulic system, 3-cell with CODE (HP5) Dual-circuit hydraulic system with CODE (HP6) Dual-circuit hydraulic system, 3-cell, with snow plow relief with CODE (HP7) Dual-circuit hydraulic system, 4-cell with CODE (HP8) Dual-circuit hydraulic system, 4-cell, with snow plow relief with CODE (HZ5) Hydraulic connections, cells 2+3, and separate return line, rear with CODE (H43) Telescopi

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 55 Ekstra drev, hydraulik- og ledsystemer › 55.30 Hydraulikdrev, hydraulikpumper — Serie 405 (modeller 10*, 12*, 20*, 22*)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.70 Donkraft/hydrauliksystem › 35.70.1 Grundinformation — Serie 405 (modeller 10*, 12*, 20*, 22*)

PH55.30-G-2100-01BB

Function diagram for work hydraulics on circuit I and circuit II

G55.00-3156-79

Function schematic for work hydraulics, circuit I and circuit II, 4-cell, snow plow relief on connection 1, cell 2 and 3 rear, tilt cylinder at connection 5

1 Hydraulic-fluid reservoir for work hydraulics and hydrostatic fan

2 Oil filter

3 Valve block

4 Shutoff valve for tilt cylinder

5 Tilt cylinder

6 Hydraulic fluid cooler

7 Valve for snow plow relief

Circuit II Pressure fitting circuit II

P1 Hydraulic pump circuit I

P2 Hydraulic pump circuit II

P3 Hydraulic pump for hydrostatic fan

SR Separate return flow line

Z1 Cell 1 in circuit I, connection 1 and 2

Z2 Cell 2 in circuit I, connection 3 and 4

Z3 Cell 3 in circuit I, connection 5 and 6

Z4 Cell 4 in circuit I, connection 7 and 8