PE88.79-W-2000-60AB | Legend of wiring diagram of outside mirrors | Models 970, 972, 974, 975, 976 as of 1.3.03 |
Code | Designation | Coordinate |
A7 | Base module | 6L |
E25 | Driver door entrance lamp | 13L |
E26 | Passenger door entrance lamp | 25L |
F12Si12 | Horn/mirror heater/mirror adjustment/diagnostic socket/air conditioning/fog lights/rear fog light fuse, circuit 15 (base module) | 5K |
J14 | Cable weld connector, to A7, S24, S25, S37, S43, X13-14/2, X22.1-12/3, X23.1-12/5 | 6H |
J31 | Cable weld connector, to E25, R4, S87, X22.1-12/10 | 15H |
J41 | Cable weld connector, to J49/W2.1 | 27J |
J42 | Cable weld connector, to W6 | 8K 28K |
J49 | Cable weld connector, to W2.1 | 27K |
J54 | Cable weld connector, to E26, R5, X23.1-12/11 | 23J |
J58 | Cable weld connector, to A1, A31, K4, K5, K42, X5.1-18/1, X22.1-12/3, X23.1-12/5, X83-6/5 | 2H |
K5 | D+ relay (relay holder L1) | 3L |
M9 | Driver mirror adjustment motor | 17K |
M10 | Passenger mirror adjustment motor | 22K |
R4 | Driver mirror heater | 16K |
R5 | Passenger mirror heater | 21K |
S37 | Mirror adjustment switch | 16C |
S87 | Driver door lock switch | 11L |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 27L |
W6 | Ground point, circuit 31, drive column bearing bracket | 8L 28L |
X22.1 | Driver door connector | 14F |
X23.1 | Passenger door connector | 20F |
(138) | With GGVS | 3E |
(273) | Voltage supply | 3L |
(522) | with right-hand drive on pin 5 | 16C |
(523) | with right-hand drive on pin 2 | 18C |
(524) | with right-hand drive on pin 11 | 21C |
(525) | with right-hand drive on pin 8 | 23C |