PE42.30-P-2000-60GA | Legend of wiring diagram for antilock brake system (ABS) | Model 463.244/245/247/250/254/309/ |
Code | Designation | Coordinate |
A7/3 | Traction system hydraulic unit | 4L |
F2 | Fusebox (8 fuses) | 33L 45L |
F2f2 | Fuse 2 | 33K 45K |
F2f4 | Fuse 4 | 32K |
F34 | Interior fuse box | 22L |
F34f40 | Fuse 40 | 22K |
K32/1 | ABS return pump relay | 12L |
L6/1 | Left front rpm sensor | 23L |
L6/2 | Right front rpm sensor | 27L |
L6/3 | Left rear rpm sensor | 49L |
L6/4 | Right rear rpm sensor | 50L |
N10/1 | Front signal acquisition and actuation module (SAM) | 15K 41K 51K |
N10/2 | Rear signal acquisition and actuation module (SAM) | 38K |
N15/5 | Electronic selector lever module control unit | 30K |
N47-7 | ABS control unit | 1A 16A 30A 44A 58A |
S9/1 | Stop lamp switch (4-pin) | 35L 37L |
S10/1 | Left front brake pad contact sensor | 25L |
S10/2 | Right front brake pad contact sensor | 29L |
S10/3 | Left rear brake pad contact sensor | 47L |
S76 | Differential lock switch group | 54K |
U9 | Valid for ABS | 54G |
U12 | Valid for left-hand drive vehicles | 9D 17C 19C |
U13 | Valid for right-hand drive vehicles | 8D 18C 20C |
W10/8 | Ground (right battery recess) | 43L 44L |
W29/1 | Ground (left A-pillar) | 9L 18L 20L |
W29/2 | Ground (right A-pillar) | 8L 17L 19L |
X20/10 | Parking brake connector | 41F |
X35/6 | Cockpit/module box separation point | 54F |
X63/4 | CAN databus adapter connector (2-pin) | 57L |
X88/13 | Right front brake pad contact sensor connector | 28H |
X88/14 | Left front brake pad wear indicator contact sensor connector | 24H |
X92/3 | Frame connector (22-pin) | 46F |
Z20/35 | CAN bus screening end | 59H |
Z73/6 | CAN bus shielding solder terminal | 59L |