Wiring diagrams
The wiring diagrams are assigned to the usual function groups 00 to 91.
The wiring diagrams are saved in the respective function group, sorted according to PE number. E.g. :
PE00.19-S-2172VDB
PE82.62-S-2108VDB
The location of electrical connections and ground points is shown in the following 2 documents:
Electrical connectors: GF00.19-S-1005VDA
Ground points: GF00.19-S-2002VDA
The signal and circuit designations used are explained in the section "Abbreviations of signal and circuit designations for wiring diagrams" OV00.01-S-1001-28VDB.
All electrical components are sorted alphabetically and listed according to the abbreviations in the "Search aid for all electrical components" OV00.01-S-1909VDB. A reference is made to the wiring diagrams in which the relevant component is explained completely.
Variants of a component or the subdivision of a component into several wiring diagrams are stated in the third column.
Wiring diagram number |
a | Information type |
b | Function group |
c | Function subgroup |
d | Producer ID |
e | Record number |
f | Information unit number |
g | Validity letter (s) |
P00.19-0401-01
Kinds of wiring diagrams
The wiring diagrams are prepared as function schematics, function diagrams, control unit diagrams or connector sleeve wiring diagrams, ground wiring diagrams and connector wiring diagrams.
Function schematics
The control units and electrical components belonging to the function are shown as symbols. The functional connections are realized by direct lines or by the data bus.
Function diagrams
All the parts of components that are relevant to a function are explained in the wiring diagram.
Control unit diagrams
Control units are represented complete with all connected components. Control units with many connections can be subdivided into several wiring diagrams.
Connector sleeve wiring diagrams, and wiring diagrams and connector wiring diagrams
Connector sleeve, ground points and electrical connections, which are not shown completely in any control unit diagram, are shown here complete with all connected components.
The symbol refers to further wiring diagrams.
Function schematic |
a | Connection via the bus system |
b | Direct interface |
c | Symbols (components, control units) |
d | Reference to further wiring diagrams |
P00.19-3084-01
CAN bus presentation |
CAN A | Telematics CAN |
CAN C | Drive train CAN |
CAN I | Drive train sensor CAN |
P00.01-3439-01
P00.01-4353-07
LIN A2 | Telephone keypad LIN | LIN E1 | Steering LIN | LIN E2 | Seat occupied recognition LIN | ||
LIN C3 | Drivetrain LIN |
MOST bus presentation |
MOST | Media Oriented System Transport |
P00.01-3091-01
Wire cross-sections of the vehicle may differ from the illustration in the wiring diagrams.
Wire Identification |
a | Line cross section in mm2 |
b | Basic color |
c | Identification color |
P00.19-2306-01
Wire colors:
BK = Black
BN = Brown
BU = Blue
GN = Green
GY = Gray
OG = Orange
PK = Pink
RD = Red
TR = Transparent
VT = Violet
WH = White
YE = Yellow
Fuse blocks |
a | Output slot numbering (A) |
b | Line bridge |
c | Terminal designation |
d | Fuse rating in amp(s) |
e | Input slot numbering (E) |
f | Fuse number |
P00.19-0405-01
Components and switches |
a | Components that are not completely shown are shown as an outline |
b | Switching contacts are shown in the rest position |
P00.19-0406-01
Variants
The wiring diagrams may contain variants that are framed to identify them as variants and have been marked as follows:
"Code ...". The variants denoted in this manner are listed in the legends.
With a vehicle or major assembly designation (type, engine or transmission). These variants are marked in the wiring diagram by appropriate symbols.
With a time-related restriction (date). The specified time-related production data applies to the market launch of standard production. Preproduction vehicle may have an earlier deployment date.
In case of changes that come up after the market launch of standard production, the variants can be designated with 1 and 2.
Logical combinations of variants are represented as follows:
OR combination
Validity elements are presented one below the other; the variant is valid if at least one of the validity elements applies.
AND combination
Validity elements are presented indented one below the other; the variant is valid if all the validity elements apply.
1 | The variant is valid if at least one of the two validities applies. |
2 | The variant is valid if both validities apply |
3 | The variant is valid if at least one of the two validities A and B and at least one of the two validities C and D applies. |
4 | The variant is valid if either the two validities A and B apply or the validity C applies |
P00.19-5469-01
Special features in WIS presentation
In the WIS, certain areas can be selected and consequently a switch made to other documents or wiring diagrams:
Selection of electrical connections Document "Location of the electrical plug connectors"
Selection of ground points Document "Location of ground points"
Selection of connector sleeves Document "Location of connector sleeves"
Selection of component designations with A ... and N ... Document: "Abbreviations of signal and circuit designations for wiring diagrams"
Selection of component designation "A0" Document "Use of wiring diagrams"
Selection of symbols Reference to further wiring diagrams