gf8260p5000fq

Media interface control unit, component description

Type gf · emne 82.60 · version 0102 · 2012-04-26

Gælder for: MODEL 218 with CODE (518) Media interface up to model year 2013 /AEJ 12

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.60 Radio, audio-video — Serie 218

GF82.60-P-5000FQ

Media interface control unit, component description

20.3.12

MODEL 218
with CODE (518) Media interface
up to model year 2013
/AEJ 12

Media interface control unit, component description

P82.60-8095-11

Rear center console, partly disassembled

N125/1 Media interface control unit

Location

The media interface control unit is installed on the propeller shaft tunnel below the rear center console.

Task

The media interface control unit does the following:

Receive signals

Transmit signals

Receive signals

The media interface control unit receives the signals over the following connections:

Media Oriented System Transport (MOST)

Direct lines

---------------------------------------------------------------------------------------

Media Oriented System Transport (MOST)

The media interface control unit receives control signals over the MOST from the audio equipment.

Direct lines

The media interface control unit reads in the following signals:

- Power supply via circuit 31 and circuit 30g

- Audio signals from the media interface electrical connector (X18/70)

- Electronic wake-up signal

---------------------------------------------------------------------------------------

Transmit signals

The media interface control unit sends the signals over the following connections:

MOST

Direct lines

MOST

The media interface control unit sends audio signals over the MOST to the audio equipment (without code (810) Sound system) or to the sound system amplifier control unit (N40/3) (with code (810) Sound system).

Direct lines

The media interface control unit sends control and operating signals over direct lines to the media interface electrical connector.

Apart from this, the media interface control unit supplies the media interface electrical connector with power over direct lines for operating portable terminals.

Technical data

Designation

Unit

Values

Tolerance range

Remarks

Media interface control unit

Power supply

V

12

Operating voltage (UB)

Voltage limits

V

>9

Minimum (UBmin)

V

< 16

Maximum (UBmax)

Power consumption

mA

300

Ready (IB)

mA

300

Action, typical (IAction)

A

1.5

Maximum (IAction)

mA

0.1

Quiescent current

Reverse polarity protection

Yes, in range -9 V to -16 V

Flash capability/coding capability

No/DC-compatible

Wiring diagram for media interface control unit

N125/1

PE82.60-P-2105-97XAA

Henviste dokumenter