gf8230p4007a

Function of braking wiper motor

Type gf · emne 82.30 · version 0101 · 1999-11-08

Gælder for: MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.30 Vinduesviskere — Serie 202 · Serie 208 · Serie 210 (modeller 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 081, 082, 083, 206, 210, 215, 216, 217, 225, 226, 235, 237, 245, 248, 261, 262, 263, 265, 270, 272, 274, 281, 282, 283, 606, 610, 616, 617, 663)

GF82.30-P-4007A

Function of braking wiper motor

14.12.96

MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97

If a wiping operation is to be completed properly, the wiper arm must stop in the rest position. For this purpose the signal acquisition and actuation module (SAM) (N10/1) reads in the status of the cam switch. The cam switch is actuated as it moves passed the rest position. The SAM switches off the relay and

-----------------------------------------------------------------------------------------

brakes the wiper motor (M6/1) by short circuiting via an electronic circuit.

If circuit 15R is switched off before reaching the rest position,
the motor stops immediately.

-----------------------------------------------------------------------------------------

Wiper motor

GF82.30-P-4104A

Henviste dokumenter