gf8230p4006a

Function of windshield wiper automatic speed reduction

Type gf · emne 82.30 · version 0101 · 1999-11-08

Gælder for: MODEL 202 as of 1.6.97, 208, 210.081, 210 (except 210.2 /081) as of 1.3.97 except CODE (345a) Rain sensor

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.30 Vinduesviskere — Serie 202 · Serie 208 · Serie 210 (modeller 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 081, 082, 083, 606, 610, 616, 617, 663)

GF82.30-P-4006A

Function of windshield wiper automatic speed reduction

14.12.96

MODEL 202 as of 1.6.97,
208, 210.081,
210 (except 210.2 /081) as of 1.3.97 except CODE (345a) Rain sensor

The signal acquisition and actuation module (SAM) (N10/1) receives CAN messages with information on the vehicle speed.
If the vehicle speed stops below a value of 5 km/h, the SAM switches the windshield wiper back one speed stage.

If wiper stage 2 is selected it is switched to stage 1. If stage 1
is selected the intermittent wiping function is switched on.

If the intermittent wiping function is switched on the automatic speed reduction increases the intermittent time by 1.5 seconds.

-----------------------------------------------------------------------------------------

When the speed increases to a value above 8 km/h the SAM switches back to the previously selected stage.

The automatic speed reduction function can be programmed out with the HHT by means of version coding.

-----------------------------------------------------------------------------------------

Windshield intermittent wiping

GF82.30-P-3003A

Windshield wiping

GF82.30-P-3004A

Henviste dokumenter