Switching on interior lighting with anti-theft alarm, function

GF82.20-P-2007A

15.12.96

MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97

When the anti-theft alarm (ATA) trips or the taxi emergency alarm is actuated the interior lighting is switched on. The PSE control module (combined) (A37) sends a corresponding CAN message during the alarm. The overhead control panel control module (N70) switches on the front dome lamp (N70e1). The rear dome lamp (E15/3) is switched on by the PSE control module (not on model 208.4). In the case of a taxi emergency alarm only the rear dome lamp (E15/3) is switched on.

If the alarm is interrupted the interior lighting is switched back off.



On model 210 with code 877 dome lamp (E15/3e3) and reading lamps (E15/3e1, E15/3e2) are switched on in the rear dome lamp (E15/3).

	Control of interior lighting switch-on time, function		GF82.20-P-3001A
	Dimming interior lighting, function		GF82.20-P-3002A
	Control of rear dome lamp, function	except model 208.4 (convertible)	GF82.20-P-4005A
	Overhead control panel control module, location/purpose/design/function	except model 208.4 (convertible)	GF82.20-P-4101A
		Model 208.4 (convertible)	GF82.20-P-4101KA
	Anti-theft alarm (EDW)	up to 5/98	GF80.50-P-0001B
		as of 6/98	GF80.50-P-0001F
	Rear dome lamp, location/purpose/design/function	Model 210.0 as of 6/98 with code 877	GF82.20-P-4109A

Henviste dokumenter