GF72.29-P-3007A | Power windows with one-touch window up and window down control, function | 9.12.96 |
MODEL 202 as of 1.6.97
MODELS 208, 210.081 /281 (except 208.4)
MODEL 210 (except 210.081 /281) as of 1.3.97
Function prerequisites
No overvoltage/undervoltage
Circuit 15 on or circuit 15R on
Function
The automatic window raising/lowering function is triggered by pressing the power window switch over the first click-stop position in the "open" or "close" direction. The corresponding door control module receives a CAN message and actuates the relevant power window until the window is completely closed or opened, even if the switch has already been released.
With non-normalized windows, instead of the automatic window raising/lowering function, the manual window raising/
-----------------------------------------------------------------------------------------
lowering function is performed.
In the ,, and versions of MODEL 208, instead of the automatic window raising function, the manual window raising function is performed.
Function abort
The window raising/lowering function is aborted if
the power window switch is pressed again, after it was in the center position,
lock-up of the power window is detected,
the function prerequisites are no longer satisfied,
with window raising, the obstruction sensor reacts,
with window lowering, denormalization takes place.
-----------------------------------------------------------------------------------------