Convenience closing of power windows function

GF72.29-P-3005A

9.12.96

MODELS 202 as of 1.6.97,
208, 210.081 /281 (except 208.4),
210 (except 210.081 /281) as of 1.3.97

Function prerequisites

 No overvoltage/undervoltage

 circuit 15 off and

 circuit 15R off and

 circuit 15c off detected

Function

Each door control module (N69/1) or (N69/2), (MODELS 202/210 also N69/3 or N69/4) receives over CAN the request for convenience closing and then actuates the power window motor.

The motor is actuated until the door control module

-----------------------------------------------------------------------------------------

detects through position recognition that the window is closed. When operating using the transmitter key or lock switch (, ) the convenience closing function of the power window is also performed for non-normalized windows.

The convenience closing function is aborted if

 the request over CAN is no longer received or

 lock-up of the power window is detected or

 the function requirements listed above are no longer satisfied.

-----------------------------------------------------------------------------------------

	Position recognition for power windows	GF72.29-P-4000A
	Lock up recognition for power windows	GF72.29-P-4001A
	Synchronization of power windows	GF72.29-P-4003A
	Convenience opening of the power windows	GF72.29-P-3004A
	Convenience actuation using transmitter key	GF80.45-P-2003A
	Convenience actuation using lock switch	GF80.45-P-2004A

Henviste dokumenter