Gælder for: Model all (CAR) with code 307 (Temperature-controlled cup holder in rear passenger compartment) Model all (CAR) with code 311 (Temperature-controlled cup holder)
with code 307 (Temperature-controlled cup holder in rear passenger compartment)
Model
all (CAR)
with code 311 (Temperature-controlled cup holder)
Overview
This document contains information on:
Cooling
Heating up
Fault messages
General
Beverages can be cooled or heated with the temperature-controlled cup holder. It is possible to heat up to approx. 58 °C and to cool down to approx. 3 °C.
The main component parts of the temperature-controlled cup holder are:
Residual heat indicator lamp
Cup holder button
Cooling and heating element
Fan
Temperature sensor
Electronic control
Function requirements
Circuit 15R ON
Cooling
The user can activate or deactivate the cooling function via the cup holder push button switch. A blue indicator lamp displays the active cooling procedure.
The cooling procedure has the following time-dependent cooling output for a beverage can (volume: 0.33 l, temperature: 21 °C):
After 30 min: Approx. 15 °C
After 60 min: Approx. 10 °C
After 120 min: Approx. 5 °C
Heating up
The user can activate and deactivate the heating function via the cup holder push button switch. A red indicator lamp displays the active warming procedure.
The warming procedure has the following time-dependent warming output for a beverage can (volume: 0.33 l, temperature: 21 °C):
After 30 min: Approx. 30 °C
After 60 min: Approx. 40 °C
After 120 min: Approx. 50 °C
The residual heat indicator lamp signals the increased temperature starting from a temperature of approx. 40 °C.
Fault messages
The indicator lamp displays errors that occur during operation by flashing correspondingly:
Two flashes: The cup holder button is disabled.
Three flashes: The cooling and heating element of the cup holder is impaired.
Four flashes: The temperature sensor is impaired.