P82.10-8408-78
1 | Exterior lights and electric parking brake switch group |
Overview
This document contains information on:
General
Function requirements
Function
General
The electric parking brake (EFB) holds the vehicle stationary on uphill and downhill gradients even when the driver is absent.
It is activated manually via a control element or automatically according to the driving state.
Function requirements
Ignition ON (circuit 15)
Function
Combined floating brake calipers with integrated electric actuator motors are located on the rear axle.
The braking parts are held in the brake position when deenergized by a self-locking mechanical effect. The ESP® control unit actuates the left electric parking brake actuator motor and the right electric parking brake actuator motor.
When the EFB is active, the red indicator lamp lights up in the display of the instrument cluster.
When the EFB is not active, the red warning message "Risk of rolling - EFB not closed" appears in vehicles with manual transmission when the driver's door is opened.
If the red indicator lamp flashes, there is a malfunction.
Function schematics | |||
Function schematic for electric parking brake variables | Model 118, 167, 177, 243, 247Model 213, 238, 257, 290 as of model year 2021 | ||
Model 223 | |||
Additional basic functions | |||
Electric parking brake release, basic function | Model all (CAR) | ||
Emergency braking, basic function | Model all (CAR) | ||
Run-off control basic function | Model all (CAR) | ||
Dynamometer test mode, basic function | Model all (CAR) | ||
Control units | |||
Electronic Stability Program control unit, basic function | Model all (CAR) | ||
Components | |||
Electric parking brake actuator motors, basic function | Model all (CAR) |