gf4210b4001a

Sliding caliper disc brake, function

Type gf · emne 42.10 · version 0100 · 2016-02-12

Gælder for: MODEL 382.17/ 18 with CODE (BB5) disc brakesMODEL 634.0/ with CODE (BB5) disc brakes

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 382 · Serie 634 · Serie 906 (modeller 918, 977, 983, 988, 998)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 382 · Serie 634 · Serie 906 (modeller 918, 977, 983, 988, 998)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 382 · Serie 634 · Serie 906 (modeller 918, 977, 983, 988, 998)

Gælder også for motorer/gearkasser: 457 907, 457 908, 457 916, 457 927, 457 932, 926 920, 926 926, 926 942, 926 996, 926 999

GF42.10-B-4001A

Sliding caliper disc brake, function

12.02.16

MODEL 382.17/ 18 with CODE (BB5) disc brakes

MODEL 634.0/ with CODE (BB5) disc brakes

Sliding caliper disc brake, function

B42.10-0340-03

1 Brake caliper.

2 Support

3 Brake rotor

4 Brake pads

5 Guide bushing

6 Threaded tube

7 Adjusting device

8 Chain of rolls

9 Lever

10 Pusher

11 Pressure parts

Composition

The main components of the disc brake with sliding brake caliper are:

- Ventilated brake disc (3).

- Support fastened to the rear axle and to the front axle steering knuckle where the brake caliper (1) is located, guided by the guide bushings (5).

- Brake pads (4).

- Actuation device that presses, through the lever (9), the pressure pieces (11) against the brake pads (4).

- Adjusting device integrated in the brake caliper (parts 6; 8 and 10).

The disc brake with sliding caliper is activated by means of pneumatic combined and membrane cylinders.

Brake application and release - operation

GF42.10-B-5000A

Brake regulator - operation

GF42.10-B-5001A

Henviste dokumenter