GF40.15-P-0001-02E | Tire pressure monitor (TPM), activation | Models 215, 220 as of 1.9.02 up to 30.9.03 with code (475) tire pressure monitor | |
In the event in changes to the air pressure in the tires by the driver, in the event of a wheel replacement or a tire change, the adjusted air pressure values in the TPM [RDK] control unit (N88) must be stored as specified monitoring values.
P82.90-2168-01
Proceed as follows:
Switch on ignition (circuit 15 On).
The engine can be switched on or off.
Using the scroll forward/back button (S110s1) select the tire pressure monitor (TPM) system from the "standard display" menu for the multifunction display.
The tire pressures or information messages due to tire pressure changes detected previously are displayed.
P54.30-6607-01
Press the reset button (1) in the instrument cluster (A1).
The previous display changes to the selection screen when "NO" is preselected.
P54.30-7063-01
P82.90-2168-01
Press the "+" button on the + and - pushbutton (setting specific functions and volume control) (S111s1) on the multifunction steering wheel.
The selection screen with the pre-selection "YES" appears for approx. 2 s .
Pressing the other keys leads to termination of the activation process.
P54.30-7068-01
P54.30-7618-71
Activation is confirmed by the message opposite.
P54.30-7117-71
Once the engine has been started the system message shown opposite appears.
If activation is carried out when the engine is running, this system message appears with a time delay of approx. 30 seconds.