gf3020p4012l

Electronic power control malfunction indicator lamp position / task / design / function

Type gf · emne 30.20 · version 0104 · 1999-11-08

Gælder for: ENGINE 119.980 /981, 120.982 up to 31.5.96 in MODEL 140 up to 31.5.96 ENGINE 119.982, 120.983 up to 31.5.96 in MODEL 129 up to 31.5.96

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.20 Elektronisk speederpedal (EFP) / tempomat (TPM) / tomgangsregulering (LLR) — Serie 129 · Serie 140

Gælder også for motorer/gearkasser: 119 980, 119 981, 119 982, 120 982, 120 983

GF30.20-P-4012L

Electronic power control malfunction indicator lamp position / task / design / function

7.7.95

ENGINE 119.980 /981, 120.982 up to 31.5.96 in MODEL 140 up to 31.5.96

ENGINE 119.982, 120.983 up to 31.5.96 in MODEL 129 up to 31.5.96

Electronic power control malfunction indicator lamp position / task / design / function

P54.30-0339-01

A1e43 EPC (Electronic Power Control) malfunction indicator lamp
(shown on model 140)

The EPC malfunction indicator lamp is discontinued as of 06/96

Position

In instrument cluster

Task

Indicating fault in electronic accelerator pedal (electronic accelerator emergency running)

Design/function

The malfunction indicator lamp is supplied with voltage by circuit 15. The ME-SFI control module actuates the lamp by connecting it to GND.

The malfunction indicator lamp (A1e43) should come on when the ignition is switched on and go out when the engine is running. If it does not go out, there is a fault at the electronic accelerator pedal. The system is in the emergency running mode (read HHT fault memory).