gf2719p3000c

Starter lockout / backup lamp switch, location / task / function

Type gf · emne 27.19 · version 0100 · 2007-03-20

Gælder for: TRANSMISSION 722.431 with ENGINE 111.940 #2 TRANSMISSION 722.370 with ENGINE 119.970 #2 TRANSMISSION 722.366 with ENGINE 119.971 #2 TRANSMISSION 722.364 with ENGINE 119.972 #2 with CODE (440a) Cruise control TRANSMISSION 722.365 with ENGINE 119.974 #2 with CODE (440a) Cruise control TRANSMISSION 722.354 with ENGINE 119.975 #2 with CODE (440a) Cruise control TRANSMISSION 722.362 with ENGINE 120.980 /981 #2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.19 El-system gearkasse

Gælder også for motorer/gearkasser: 111 940, 119 970, 119 971, 119 972, 119 974, 119 975, 120 980, 120 981, 722 354, 722 362, 722 364, 722 365, 722 366, 722 370, 722 431

GF27.19-P-3000C

Starter lockout / backup lamp switch, location / task / function

25.6.99

TRANSMISSION 722.431 with ENGINE 111.940 #2

TRANSMISSION 722.370 with ENGINE 119.970 #2

TRANSMISSION 722.366 with ENGINE 119.971 #2

TRANSMISSION 722.364 with ENGINE 119.972 #2 with CODE (440a) Cruise control

TRANSMISSION 722.365 with ENGINE 119.974 #2 with CODE (440a) Cruise control

TRANSMISSION 722.354 with ENGINE 119.975 #2 with CODE (440a) Cruise control

TRANSMISSION 722.362 with ENGINE 120.980 /981 #2

15.03.07

The document has been updated to this date

and will no longer be subject to revision.

Starter lockout / backup lamp switch, location / task / function

P27.19-0001-06

Task

Determines if the selector lever is engaged in position P or N and passes this information on to engine control module PMS (N3/6) or LH (N3/1).

Recognizes driving position "2/3".

Switches on the backup lamp when selector lever position "R" is engaged.

Only allows starter (terminal 50) to be actuated at selector lever position "P" or "N".

1 Automatic transmission

S16/3 Starter lockout / backup lamp switch

Starter lockout / backup lamp switch, location / task / function

P27.19-0002-06

Function

In selector lever position "P" and "N", connection 8 and 9 (terminal 50 and 50R) are connected. When a driving position is engaged, the connection between 8 and 9 is interrupted. This is detected by the engine control module which then ensures a lower idle speed (reducing the tendency of the vehicle to creep forward). It is also possible to actuate the starter in this selector lever position.

S16/3 Starter lockout / backup lamp switch

Starter lockout / backup lamp switch, location / task / function

P27.19-0005-06

In selector lever position "2" and "3", connections 6 and 7 are connection. This is detected by the engine control module. The control module switches off the shift point retard which is activated for a short time after the engine is started.

When selector lever position "R" is engaged, the backup lamps are connected to the power supply.

S16/3 Starter lockout / backup lamp switch