gf0704p4117ib

Camshaft Hall sensor, location/task/design/function

Type gf · emne 07.04 · version 0101 · 2008-03-27

Gælder for: ENGINE 611.961 as of 1.6.99 in MODEL 210.006 /007 /206 /606 ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706 up to Model Year 8 ENGINE 612.961 in MODEL 210.016 /216 /616 ENGINE 612.962 in MODEL 203.016 /216 up to Model Year 8 ENGINE 612.963 in MODEL 163.113 ENGINE 613.960 in MODEL 220.026 /026 /126 ENGINE 613.961 in MODEL 210.026 /226 ENGINE 612.990 in MODEL 203.018 /218 /718 up to Model Year 8 ENGINE 612.967 in MODEL 209.316

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.04 Følere, sensorer — Serie 163 (modeller 113) · Serie 203 (modeller 004, 006, 016, 018, 204, 206, 216, 218, 706, 718) · Serie 209 (modeller 316) · Serie 210 (modeller 006, 007, 016, 026, 206, 216, 226, 606, 616) · Serie 220 (modeller 026, 126) · Serie 611 (modeller 961, 962) · Serie 613 (modeller 960, 961)

Gælder også for motorer/gearkasser: 612 961, 612 962, 612 963, 612 967, 612 990

GF07.04-P-4117IB

Camshaft Hall sensor, location/task/design/function

18.11.03

ENGINE 611.961 as of 1.6.99 in MODEL 210.006 /007 /206 /606

ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706 up to Model Year 8

ENGINE 612.961 in MODEL 210.016 /216 /616

ENGINE 612.962 in MODEL 203.016 /216 up to Model Year 8

ENGINE 612.963 in MODEL 163.113

ENGINE 613.960 in MODEL 220.026 /026 /126

ENGINE 613.961 in MODEL 210.026 /226

ENGINE 612.990 in MODEL 203.018 /218 /718 up to Model Year 8

ENGINE 612.967 in MODEL 209.316

Camshaft Hall sensor, location/task/design/function

P14.20-0258-01

Shown on engine 611

B6/1 Camshaft Hall sensor

Camshaft Hall sensor position

At the last injector on the cylinder head.

Camshaft Hall sensor task

Detecting the camshaft position contactlessly by means of a segment at the camshaft. The CDI control unit (N3/9) detects the ignition TDC position of cylinder 1 from the signal supplied by the camshaft Hall sensor (B6/1). The injection timing point is synchronized on the basis of the signal supplied by the camshaft Hall sensor (B6/1) and the crankshaft position sensor (L5).

Camshaft Hall sensor design

GF07.04-P-4117-03I

Camshaft Hall sensor function

GF07.04-P-4117-02I

Henviste dokumenter