GF00.19-U-3000D | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) | 18.7.97 |
MODEL 202 as of 1.9.97
Z20 | Shielding placed inside insulated tubing | ||
Z20/1 | Shielding placed inside insulated tubing | ||
Z20/2 | Shielding placed inside insulated tubing | ||
Z20/5 | Shielding placed inside insulated tubing | ||
Z21/2 | Front door contact connector sleeve (switched ground feed from left front (S17/3) and right front (S17/4) door contact switches) | ||
Z3/1 | Circuit 15 connector sleeve (automatic A/C, feed from auxiliary coolant pump control relay - K30) | ||
Z3/15 | Circuit 15 connector sleeve (feed from fuse F3f35) | ||
Z3/26 | Circuit 15 (unfused) connector sleeve | ||
Z3/27 | Circuit 15R (unfused) connector sleeve | ||
Z3/29 | Circuit 15 connector sleeve (fused) | ||
Z35/10 | Wake-Up D2B (optical network) connector sleeve | ||
Z36/1 | Ground connector sleeve (rear PTS sensors) | ||
Z36/2 | Voltage supply connector sleeve (rear PTS sensors) | ||
Z36/3 | Ground connector sleeve (front PTS sensors) | ||
Z36/4 | Voltage supply connector sleeve (front PTS sensors) | ||
Z36/8 | Ground connector sleeve (front PTS sensor) | ||
Z37/2 | Engine CAN-Bus (low) connector sleeve | ||
Z37/3 | Engine CAN-Bus (high) connector sleeve | ||
Z38 | Backup lamp connector sleeve | ||
Z4/4 | Circuit 30Z connector sleeve (solder joint in harness) | ||
Z42 | Trailer recognition connector sleeve (PTS) | ||
Z6/1 | Ground connector sleeve | ||
Z6/16 | Ground connector sleeve (AAC/TAC temperature sensor) | ||
Z7/35 | Connector sleeve, circuit 87M, feed from BM (N16/1) | ||
Z81 | Circuit 58d connector sleeve (feed from IC) | ||
Z81/4 | Circuit 58d connector sleeve (frame floor) | ||
Z87/15 | Cable end (two-way radio) | ||
GF00.19-U-3000-01D | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - engine compartment (left) | ||
GF00.19-U-3000-02D | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - engine compartment (right) | ||
GF00.19-U-3000-03D | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - cockpit | ||
GF00.19-U-3000-04C | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - interior compartment (left) | ||
GF00.19-U-3000-05C | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - interior compartment (right) | ||
GF00.19-U-3000-06C | Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - trunk (left) | ||
GF00.19-U-3000-07A | Arrangement and assignment of Z end connectors (connectors in harness) in right of trunk |