GF00.19-P-3000FA | Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | 27.3.07 |
MODEL 203
P00.19-4006-09
P00.19-4007-09
Z3 | Circuit 15 connector sleeve | ||
Z3/29 | Circuit 15 connector sleeve (fused) | ||
Z3/31 | Circuit 15R connector sleeve, (fused, sidebag) | ||
Z3/50 | AHRA/SPS [ALWR/PML] circuit 15 connector sleeve | ||
Z4/3 | Circuit 30 connector sleeve | ||
Z4/3 | Circuit 30 connector sleeve | ||
Z5/1 | Blower/fan connector sleeve | ||
Z6 | Ground connector sleeve | ||
Z6/1 | Ground connector sleeve | ||
Z6/8 | Sensor ground connector sleeve | ||
Z6/26 | Sensor supply connector sleeve | ||
Z6/27 | Sensor ground connector sleeve | ||
Z6/30 | Ground connector sleeve | ||
Z7 | Circuit 30 connector sleeve | ||
Z7/27 | Circuit 87E connector sleeve (solder connector in wiring harness) | ||
Z7/35 | Circuit 87 M1e connector sleeve | ||
Z7/36 | Circuit 87 M2e connector sleeve | ||
Z7/40 | Circuit 30 connector sleeve | ||
Z7/41 | Sensor supply connector sleeve 1 | ||
Z7/43 | Sensor ground connector sleeve | ||
Z7/44 | Sensor ground connector sleeve | ||
Z7/46 | Circuit 30 connector sleeve | ||
Z7/46 | Circuit 30 connector sleeve | ||
Z7/55 | Connector sleeve 2, sensor supply | ||
Z7/59 | Circuit 30 connector sleeve | ||
Z7/69 | Two-way radio circuit 30 connector sleeve | ||
Z9 | Connector sleeve 1 (solder joint in harness) | ||
Z10 | Circuit 54 connector sleeve (solder joint in harness) | ||
Z11 | Connector sleeve 3 | ||
Z13 | Connector sleeve 5 | ||
Z14 | Connector sleeve 6 | ||
Z15 | Sensor ground connector sleeve | ||
Z15 | Sensor ground connector sleeve | ||
Z16 | Connector sleeve (right rear limit switch) | ||
Z17 | Connector sleeve 9 | ||
Z18 | Connector sleeve 10 | ||
Z19 | Connector sleeve 11 | ||
Z19/1 | Connector sleeve 12 | ||
Z20/1 | Screening inserted into insulated tubing | ||
Z20/17 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/23 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/24 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/25 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/26 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/35 | CAN bus screening end | ||
Z20/47 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/48 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/62 | Screening end connector sleeve | ||
Z21/5 | Trunk lid lock switch 1 connector sleeve (ATA/CL [EDW/ZV]) | ||
Z28/10 | Receiver shielding connector sleeve | ||
Z28/11 | Radio fade out unit/radio connector sleeve (- signal) | ||
Z36/1 | Rear PTS sensor ground connector sleeve | ||
Z36/2 | Rear PTS sensor voltage supply connector sleeve | ||
Z36/3 | Front PTS sensor ground connector sleeve | ||
Z36/4 | Front PTS sensor voltage supply connector sleeve | ||
Z47/6 | Circuit 30 connector sleeve | ||
Z53/9 | Interior sleeve connector, airbag circuit 31 | ||
Z56/8 | Fanfare horns, engine compartment connector sleeve | ||
Z73/6 | Ground connector sleeve | ||
Z81 | Circuit 58d connector sleeve | ||
Z81/4 | FFS [RBA] circuit 58d connector sleeve | ||
Z83/6 | Shielding connector sleeve | ||
Z83/11 | Shielding connector sleeve | ||
Z83/12 | Shielding connector sleeve | ||
Z85 | O2 sensor ground connector sleeve | ||
Z87/10 | Cable end bared 5 mm, terminal of radio mute connector | ||
Z87/17 | Connector sleeve 1, microphone ground | ||
Z87/18 | Connector sleeve 1, microphone signal | ||
Z87/22 | Connector sleeve 2, microphone signal | ||
Z87/23 | Connector sleeve 2, microphone ground | ||
Z87/31 | End shielding | ||
Z87/34 | Hands-free two-way radio connector sleeve (2m band) | ||
Z87/35 | Hands-free two-way radio connector sleeve (4m band) | ||
Z99/6 | Common rail solenoid valve 1 connector sleeve | ||
Z99/7 | Common rail solenoid valve 2 connector sleeve | ||
Z100/2 | Wake-up signal connector sleeve | ||
GF00.19-P-3000-01FA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment left | ||
GF00.19-P-3000-02FA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment right | ||
GF00.19-P-3000-03FA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - cockpit | ||
GF00.19-P-3000-04FA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior left | ||
GF00.19-P-3000-05FA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior right | ||
GF00.19-P-3000-06FA | Location and assignment of Z connector sleeves (connectors and wiring harness) - trunk left | ||
GF00.19-P-3000-07FA | Location and assignment of Z connector sleeves (connectors and wiring harness) - trunk right |