P00.19-3961-09
Z3 | Tml. 15 connector sleeve | ||
Z3/13 | Circuit 15R end sleeve | ||
Z3/29 | Circuit 15 connector sleeve (fused) | ||
Z3/31 | Circuit 15R end sleeve, fused, side airbag | ||
Z3/54 | Engine control unit circuit 15 connector sleeve | ||
Z3/60 | Driver circuit 15R end sleeve | ||
Z4/3 | Circuit 30 end sleeve | ||
Z5 | Diesel engine LIN connector sleeve | ||
Z6 | Ground connector sleeve | ||
Z6/1 | Ground connector sleeve | ||
Z6/3 | Sensor 2 ground connector sleeve | ||
Z6/8 | Sensor ground connector sleeve | ||
Z6/23 | Ground connector sleeve | ||
Z6/27 | Sensor ground connector sleeve | ||
Z6/28 | Sensor ground connector sleeve | ||
Z6/30 | Ground connector sleeve | ||
Z6/56 | Circuit 31 end sleeve | ||
Z6/85 | Sensor ground 1 connector sleeve | ||
Z6/85(1) | Sensor ground 1 connector sleeve | ||
Z6/94 | Driver seat circuit 31 connector sleeve | ||
Z6/95 | Passenger seat circuit 31 connector sleeve | ||
Z7/5(1) | Circuit 87 end sleeve | ||
Z7/5(2) | Circuit 87 end sleeve | ||
Z7/19 | Circuit 30 (fused) end sleeve | ||
Z7/26 | Circuit 30 end sleeve (solder connector in harness) | ||
Z7/35 | Circuit 87M1e connector sleeve | ||
Z7/35z1 | Circuit 87M1e connector sleeve | ||
Z7/35z2 | Circuit 87M1e connector sleeve | ||
Z7/36 | Circuit 87 M2e end sleeve | ||
Z7/36z1 | Circuit 87 M2e end sleeve | ||
Z7/40 | Circuit 30 end sleeve | ||
Z7/41 | Sensor supply connector sleeve | ||
Z7/43 | Sensor ground connector sleeve | ||
Z7/46 | Circuit 30 end sleeve | ||
Z7/60 | Vehicle speed signal output connector sleeve | ||
Z7/68 | Taximeter circuit 30 connector sleeve | ||
Z9 | End sleeve 1 (solder connector in wiring harness) | ||
Z10 | Circuit 54 end sleeve (solder connector in wiring harness) | ||
Z11 | End sleeve 3 (solder connector in wiring harness) | ||
Z13 | Connector sleeve 5 | ||
Z14 | End sleeve 6 (solder connector in wiring harness) | ||
Z15 | Connector sleeve 7 | ||
Z16 | End sleeve 8 | ||
Z17 | End sleeve 9 | ||
Z18 | Radio data transmission connector sleeve | ||
Z19 | End sleeve 11 | ||
Z19/1 | End sleeve 12 | ||
Z19/2 | End sleeve 13 | ||
Z19/3 | Right special signal connector sleeve | ||
Z19/4 | Left special signal connector sleeve | ||
Z20/26 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/29 | End shielding | ||
Z21/28 | Trunk lighting connector sleeve | ||
Z28/3 | Right rear speaker group connector sleeve (+ signal) | ||
Z28/4 | Right rear speaker group connector sleeve (- signal) | ||
Z28/18 | Sound system/antenna control connector sleeve | ||
Z28/20 | Left A-pillar speaker group connector sleeve (+ signal) | ||
Z28/21 | Left A-pillar speaker group connector sleeve (- signal) | ||
Z28/22 | Speaker group end sleeve on right A-pillar (signal+) | ||
Z28/23 | Speaker group end sleeve on right A-pillar (signal) | ||
Z28/57 | Portable CTEL control signals connector sleeve | ||
Z30/5 | FFS [RBA] rear fog lamp connector sleeve | ||
Z33/1 | Alternator energization connector sleeve (+) | ||
Z33/2 | Alternator energization connector sleeve (-) | ||
Z35/10 | MOST wake-up signal connector sleeve | ||
Z36/1 | Rear PTS sensor ground connector sleeve | ||
Z36/2 | Rear PTS sensor voltage supply connector sleeve | ||
Z36/3 | Front PTS sensor ground connector sleeve | ||
Z36/4 | Front PTS sensor voltage supply connector sleeve | ||
Z36/22 | Engine compartment sensor supply connector sleeve | ||
Z37/6 | CAN bus (high) connector sleeve | ||
Z37/7 | CAN bus (low) connector sleeve | ||
Z38 | Backup lamp connector sleeve | ||
Z53/11 | Interior connector sleeve (front passenger heated seat ground) | ||
Z53/12 | Interior connector sleeve (front passenger heated seat signal) | ||
Z53/13 | Interior connector sleeve (drivers heated seat ground) | ||
Z53/14 | Interior connector sleeve (driver heated seat signal) | ||
Z63 | Fanfare horns signal connector sleeve | ||
Z81 | Circuit 58d connector sleeve | ||
Z83/12 | Shielding connector sleeve | ||
Z83/13 | Shielding connector sleeve | ||
Z87/5 | Wire end stripped 5 mm; two-way radio voltage supply | ||
Z87/9 | Wire end stripped 5 mm; two-way radio on connection | ||
Z87/27 | End shielding | ||
Z87/29 | End shielding | ||
Z88 | Left front axle rpm sensor connector sleeve | ||
Z111 | Voltage supply connector sleeve | ||
Z217/1 | Weight sensing system sensor connector sleeve, supply voltage | ||
Z217/2 | Weight sensing system sensor connector sleeve, ground | ||
Z218 | Circuit 31 end sleeve | ||
Z219/1 | Starter-alternator sensor supply connector sleeve | ||
Z219/2 | Starter-alternator sensor ground connector sleeve | ||
Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment left | |||
Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment, right | |||
Location and assignment of Z connector sleeves (cable connections in wiring harness) - cockpit | |||
Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior left | |||
Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior right | |||
Location and assignment of Z connector sleeves (connectors and wiring harness) -trunk left | |||
Location and assignment of Z connector sleeves (connectors and wiring harness) -trunk right |