GF00.19-P-3000BA | Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | 8.11.11 |
MODEL 209
P00.19-4913-09
P00.19-4911-09
Z1 | Connector sleeve 2 (solder joint in harness) | Engine 642 | |
Z2 | Connector sleeve 2 (solder joint in harness) | Engine 642 | |
Z3 | Tml. 15 connector sleeve | ||
Z3/29(1) | Circuit 15 connector sleeve (fused) | Engine 112 , M113 | |
Z3/29(2) | Circuit 15 connector sleeve (fused) | Engine 112 | |
Z3/31 | Circuit 15R connector sleeve (fused, sidebag) | ||
Z4 | Connector sleeve (solder connector in harness) | Engine 642 | |
Z4/3 | Tml. 30 connector sleeve | ||
Z5 | Connector sleeve (solder connector in harness) | Engine 642 | |
Z5(2) | Connector sleeve (solder connector in harness) | Engine 272, engine 273 | |
Z5/1 | Blower/fan connector sleeve | ||
Z6 | Ground connector sleeve | Engine 271,M642 | |
Z6(1) | Ground connector sleeve | ||
Z6(2) | Ground connector sleeve | Engine 272, engine 273 | |
Z6/1 | Ground connector sleeve | ||
Z6/26 | Sensor supply connector sleeve | Engine 272 KE, engine 273 KE | |
Z6/26 | Sensor supply connector sleeve | Engine 112, engine 113 | |
Z6/27 | Sensor ground connector sleeve | Engine 112, engine 113 | |
Z6/27 | Sensor ground connector sleeve | Engine 156 | |
Z6/3 | Ground connector sleeve | Engine 156 | |
Z6/30 | Ground connector sleeve | ||
Z6/30 (1) | Ground connector sleeve | Engine 156 | |
Z6/30 (2) | Ground connector sleeve | Engine 156 | |
Z6/42 | Ground W6 connector sleeve | ||
Z6/56 | Connector sleeve for circuit 31 | ||
Z6/58 | Power window switch ground connector sleeve | ||
Z6/60 | 30 trigger solenoid, left | ||
Z6/8 | Sensor ground connector sleeve | Engine 112, engine 113 | |
Z6/8(1) | Sensor ground connector sleeve | Engine 271 | |
Z6/8(2) | Sensor ground connector sleeve | Engine 271 | |
Z7 | Tml. 30 connector sleeve | ||
Z7/26 | Tml. 30 connector sleeve | ||
Z7/35(1) | Circuit 87M1e connector sleeve | Engine 112, engine 113, engine 156 | |
Z7/35(1) | Circuit 87M1e connector sleeve | Engine 272,M273 | |
Z7/35(2) | Circuit 87M1e connector sleeve | Engine 272, engine 273 | |
Z7/35(2) | Circuit 87M1e connector sleeve | Engine 156 | |
Z7/35(3) | Circuit 87M1e connector sleeve | Engine 156 | |
Z7/35(4) | Circuit 87M1e connector sleeve | Engine 156 | |
Z7/36 | Circuit 87 M2e connector sleeve | ||
Z7/36(1) | Circuit 87 M2e connector sleeve | Engine 272, engine 273 | |
Z7/40 | Tml. 30 connector sleeve | ||
Z7/41 | Sensor supply connector sleeve 1 | Engine 271 | |
Z7/43 | Sensor ground connector sleeve | ||
Z7/44 | Sensor ground connector sleeve | Engine 272, engine 273 | |
Z7/46 | Tml. 30 connector sleeve | ||
Z7/5 | Circuit 87 connector sleeve | Engine 642 | |
Z7/55 | Sensor supply connector sleeve 2 | ||
Z7/61 | 5V output 2 connector sleeve | Engine 156 | |
Z7/98(1) | Circuit 87 M3e connector sleeve | Engine 156 | |
Z7/98(2) | Circuit 87 M3e connector sleeve | Engine 156 | |
Z9 | Connector sleeve 1 (solder joint in harness) | ||
Z10 | Circuit 54 connector sleeve (solder connector in harness) | ||
Z15 | Sensor ground connector sleeve | Engine 612 | |
Z20/1 | Shielding placed inside insulating tubing | ||
Z20/23 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/24 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/25 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/26 | Cable end insulation not stripped, placed inside insulated tubing | ||
Z20/30 | Tracer wire connector sleeve | ||
Z20/35 | CAN bus screening end | ||
Z20/62 | Screening end connector sleeve | ||
Z21/5 | Trunk lid lock switch 1 connector sleeve (ATA/CL [EDW/ZV]) | ||
Z28/57 | Portable CTEL control signals connector sleeve | ||
Z28/59 | AM/FM signal connector sleeve | ||
Z36/1 | Rear PTS sensor ground connector sleeve | ||
Z36/2 | Rear PTS sensor voltage supply connector sleeve | ||
Z36/3 | Front PTS sensor ground connector sleeve | ||
Z36/4 | Front PTS sensor voltage supply connector sleeve | ||
Z36/12 | Headlamp range adjustment (HRA [LWR]) control bus connector sleeve | ||
Z53/9 | Interior sleeve connector, airbag circuit 31 | ||
Z56/8 | Fanfare horns, engine compartment connector sleeve | ||
Z73/6 | Ground connector sleeve | ||
Z81 | Circuit 58d connector sleeve | ||
Z81/4 | FFS [RBA] circuit 58d connector sleeve | ||
Z83/11 | Shielding connector sleeve | ||
Z83/6 | Shielding connector sleeve (solder joint in harness) | ||
Z84/1 | Throttle valve actuator connector sleeve (+ signal) | Engine 156 | |
Z84/2 | Throttle valve actuator connector sleeve (- signal) | Engine 156 | |
Z85 | O2 sensor ground connector sleeve | ||
Z87/15 | Keyless go RF antenna cable end | ||
Z87/17 | Connector sleeve 1, microphone ground | ||
Z87/18 | Connector sleeve 1, microphone signal | ||
Z87/22 | Connector sleeve 2, microphone signal | ||
Z87/23 | Connector sleeve 2, microphone ground | ||
Z99/6 | Common rail solenoid valve 1 connector sleeve | Engine 612 | |
Z99/7 | Common rail solenoid valve 2 connector sleeve | Engine 612 | |
Z100/2 | Wake-up signal connector sleeve | ||
GF00.19-P-3000-01BA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment left | ||
GF00.19-P-3000-02BA | Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment, right | ||
GF00.19-P-3000-03BA | Location and assignment of Z connector sleeves (line connections in wiring harness), cockpit | ||
GF00.19-P-3000-04BA | Location and assignment of Z connector sleeves (line connections in wiring harness), interior left | ||
GF00.19-P-3000-05BA | Location and assignment of Z connector sleeves (line connections in wiring harness), interior right | ||
GF00.19-P-3000-06BA | Location and assignment of Z connector sleeves (connectors and wiring harness) - trunk left | ||
GF00.19-P-3000-07BA | Location and assignment of Z connector sleeves (connectors and wiring harness) - trunk right |